Vortex RS12597-03 X10 CDI
X10
Switch
Ignition Curve Editor (ICE) Software
USB
/ Power Adaptor & CDI Interface Cable
The RS125 Race Kit is unique to our other products in that it comes packaged together with
our USB / Power Adaptor and the ICE (Ignition Curve Editor) Software to allow the
user to develop their own performance ignition timing maps to suit their engine package.
We do not claim to have performance maps in the RS125 that will suit your engine, however
the X10 CDI does come programmed with 10 3D Map settings to get you started. The main
differences in the settings are where the PowerJet carburettor is switched On/Off
throughout the RPM and Throttle range. In addition the RS125 X10 CDI comes
with a speed shifter input which can be interfaced to a gear lever switch (not supplied)
to allow full load gear changes with no clutch. When the connection is made between the
two switch wires provided the CDI will interrupt the spark for a period of time
(programmable with the ICE software 0-100msec) thus removing the load from the gearbox and
allowing fast gear changes.
Key Features
| Can be Programmed with10 selectable ignition 3D Maps with
High Resolution to 0.1 Degree. |
| Replaces standard CDI with no mods to wiring required and
interfaces to all the standard RS125 Logger and Tacho etc. |
| Handlebar Switch for Dynamic Map Selection |
| Small form fit - 30% smaller than the standard CDI |
| V-Boost - Internal Voltage Boost Circuit for maximising
Spark Energy across the entire rev range |
| Power Jet Control - Multiple On / Off |
| Throttle Position Input for load control |
| Rubber Mounting Boot + Brackets supplied |
| Race Proven Reliability |
Package Includes:
- VORTEX X10 CDI
- Handlabar Switch
- CD ROM with ICE (Ignition Curve Editor) Software - For Windows
95 -XP, USB Driver and Users Manual
- USB & POWER ADAPTOR (requires no external power source for
programming)
- INTERFACE CABLE - connects from USB Adaptor to CDI
- Software licence agreement and registration
|