LTR450R-2.jpg (181636 bytes)VORTEX Large .jpg (214066 bytes)FC_windham5.jpg (462550 bytes)

                                            When Timing Is Everything! 

Home
Up
ATV Models-EFI

    

  Interceptor with loom-1.JPG (327601 bytes) 
VORTEX EFI INTERCEPTOR - for the RAPTOR 700, LTR450 06-09, YFZ450R 09  EFI models    

Vortex Performance - Leaders and innovators of Programmable Ignition products to the Off Road world have now entered the EFI (Electronic Fuel Injection) arena with a Robust, Small and easy to use EFI solution specifically designed for Off Road applications. The EFI Interceptor is designed to work in conjunction with the standard ECU of the  EFI ATV. These EFI engines use what is known as open loop systems, meaning they have no lambda or wideband air fuel sensor in the exhaust to detect changes in flow through the motor. When the airbox lid is removed and /or an aftermarket pipe is added increasing the flow through the motor the standard ECU cannot adjust the fuel to correctly compensate for best performance. The EFI Interceptor piggybacks between the fuel injector and the standard ECU and also connects to the TPS (Throttle Position Sensor) to adjust the AIR/FUEL ratio according to RPM and Load  for Maximum Power and Drive. The EFI Interceptor is supplied pre programmed with a fuel map suitable for use with these basic performance enhancements of Pipe and Airbox and in addition, there are three switches which allow the user to fine tune the fuel mapping in a similar way they used to change pilot, needle and main jets on a carburetted machine. The three switches represent throttle openings from SWITCH 1- [0-33%], 2-[34-66%] 3-[ 67-100%] and allow the user to adjust the pre programmed fuel map by an additional + or -  8 % fuel. These switches are so easy to use and provide immediate feedback of position when tuning or track testing.

Key Features

bulletPre Programmed with a performance fuel map
bulletFuel Trim Switches allow fast and easy fuel adjustment without the need for a PC.
bulletInstant Plug in Performance (waterproof connectors and no cutting wires to wiring required)
bulletSmall design for weight saving and ease of mounting
bulletRobust design -fully waterproof - o-ring sealed switches - pressure washing no problem
bulletStandard ECU remains unchanged.
bulletHigh end automotive specification processor and components
bulletRe-Programmable - software not supplied

All Vortex products are factory programmed with Performance Maps developed through dyno and track testing exclusively with our network of technical support centres and top race teams worldwide.